ARM (v),
ARMS, ARMED, ARMED 1.To install armaments
2.To prepare for automatic operation ARM THE AIRCRAFT.
SET THE SWITCH TO "CLOSE" TO ARM THE CIRCUIT.
AROUND (pre) On all sides of PUT THE STRAP CLAMPS AROUND THE CYLINDER.
arrange (v) PUT PUT THE COMPONENTS IN THIS SEQUENCE: Arrange components in this order.
arrangement (n) CONFIGURATION (TN) THE CONFIGURATION OF THE AIRCRAFT MUST BE AS FOLLOWS: The arrangement of the aircraft must be as follows:
arrest (v) STOP, HOLD STOP THE PRESSURE FLOW FOR 10 SECONDS. Arrest the pressure flow for 10 seconds.
A COTTER PIN HOLDS THE GIRT BAR. The cotter pin arrests the girt bar.
arrive (v) GET TO GET THE CORRECT VALUE, SET THE SWITCH TO POSITION "2". To arrive at the correct value, set the switch to position 2.
ARROW (n) A mark that has a point to show direction MAKE SURE THAT THE ARROW POINTS IN THE DIRECTION OF THE FUEL FLOW.
article (n) OBJECT MAKE SURE THERE ARE NO LOOSE OBJECTS IN THE ENGINE AIR INTAKES. Ensure that there are no loose articles in the engine air intakes.
AS (pre) In the "manner" of, to the same quantity, equally
NOTE : For other meanings, USE: BECAUSE (con), WHILE (con). DO NOT USE THE CYLINDER AS A SUPPORT.
AS....AS (con) Construction used to show "comparison" or relation MOVE THE CONTROL AS QUICKLY AS POSSIBLE.
ascertain (v) MAKE SURE MAKE SURE THE LIGHT IS OFF. Ascertain that light is off.
ask (v) TELL, SPEAK TELL PERSON "B" TO MAKE SURE THE SWITCH IS OFF. Ask Man B to make sure the switch is off.
SPEAK TO THE LOCAL AIR-TRAFFIC CONTROLLER. Ask the local air-traffic controller.
ASSEMBLE (v),
ASSEMBLES, ASSEMBLED, ASSEMBLED To attach items together ASSEMBLE THE VALVE AS FOLLOWS:
ASSEMBLY (n) Items that are connected for a specified function REMOVE THE WHEEL BRAKE ASSEMBLY FROM THE AXLE.
assess (v) ESTIMATE (n), CALCULATE MAKE AN ESTIMATE OF THE DAMAGE. Assess the damage.
CALCULATE THE QUANTITY OF FUEL NECESSARY. Assess the quantity of fuel needed.
assessment (n) ESTIMATE, CALCULATE (v) MAKE AN ESTIMATE OF THE DAMAGE. Carry out an assessment of the damage.
CALCULATE THE NUMBER OF SHIMS NECESSARY. Do an assessment of the number of shims needed.
assign (v) GIVE GIVE A CODE TO EACH CONNECTOR. Assign a code to each connector.
|