时间：2011-08-11 18:26来源：蓝天飞行翻译 作者：航空 点击：次
|
ADF一号方位指针不出现ADF bearing pointer No.1 did not show 机长PFD 与副驾驶PFD上的最小机动速度或最小速度不一致。Minimum maneuver speed or minimum speed on captain's PFD disagreed with first officer's PFD ACARS 1) CDU 草稿栏显示无通讯。CDU scratchpad displayed NO COMM 2) 拔出关断接通按进数据不正确。OutOffOnIn (OOOI) value was incorrect 综合备用飞行显示器 integrated standby flight display（ISFD） 1) 姿态显示和主显示不一致，无故障旗显示。Attitude display disagreed with primary display; no flag displayed 2) 显示空白。Display blank ATC 1) ATC 电门在1位时高度报告不工作。Altitude reporting was INOP with ATC switch at position 1 2) ATC编码指示器不对选择器动作做出反应。ATC code indicator did not respond to selector movement ATC发射信号弱或间断。ATC transmission was weak or intermittent 指示空速/马赫数窗 IAS/MACH window 1) 所有方式电门下/上面的电门灯不亮。Lower/Upper switch light was not on for all mode switches 2) 一个方式电门的电门灯不亮。One of the switch lights was not on for one mode switch CDU 1) 亮度控制问题。Brightness control problem 2) 显示器黯淡或对焦不准。Display was dim or out of focus 3) NAV STATUS（导航状态）显示器上的DME数据显示失效。DME data on NAV STATUS displayed FAIL 4) 按压时EXEC（执行）键不工作。EXEC key did not operate when pushed 5) 显示器中间出现FMC/ OP 程序无效。FMC / OP PROGRAM INVALID displayed in the middle of the DU 6) 位置基准显示页的 GS/GPS-L/R/GS 数据丢失。GS/GPS-L/R data on POS REF display missed. 7) 导航状态显示页的 ILS 数据显示失效。ILS data on NAV STATUS displayed FAIL 8) 按压键后键不工作。Key did not work when pushed 9) 导航状态显示页的VOR数据显示失效。VOR data on NAV STATUS displayed FAIL 方式控制面板 Mode control panel 1) 方式控制面板航道窗显示不随航道选择器电门的改变而改变。COURSE window display on the mode control panel did not go with the change of course selector switch 2) 方式控制面板上的空速/马赫窗不随选择器电门变化而变化。IAS/MACH window display on the mode control panel did not go with the change of selector switch. 3) 方式控制面板上的垂直速度窗显示器不随垂直速度选择器变化而变化 VERT SPEED window display on the mode control panel did not go with the change of vertical speed selector. 4) 方式控制面板上的高度窗显示不随高度选择器电门改变而改变ALTITUDE window display on the mode control panel did not go with the change of altitude selector switch. 飞行指引仪显示器 flight director display 飞行指引仪 Flight director 1) 显示移动不正确，不能引导飞机达到所调高度。Movement displayed incorrectly,it could not guide the airplane to the setted altitude 2) 飞行方式信号牌上不显示飞行指引仪状态，自动驾驶未接通。FD status did not display on the flight mode annunciator, autopilot was not engaged. 3) 飞行指引仪接通时，飞行方式信号牌上不显示飞行指引仪状态。FD status did not display on the flight mode annunciator with F/D on 4) 俯仰或横滚方式不接通或自动断开，飞行指令显示消失。Pitch or roll mode was engaged or disengaged automatically, flight command display went out of view 5) 起飞时当按压 TO/GA 电门且飞行指引仪接通时， 飞行方式信号牌上无 TO/GA 俯仰方式显示。TO/GA pitch mode did not display on the flight mode annunciator for takeoff when TO/GA switch was pushed and F/D was engaged. 飞行方式信号牌 flight mode annunciator 1) 不能接通双通道方式/能接通CMD A方式，无法接通CMD B方式/飞行方式信号牌上不显示 FLARE（拉平）俯仰方式。Dual mode was not engaged/ CMD A can be engaged, but CMD B can not be engaged/ FLARE pitch mode did not display on the flight mode annunciator 2) 按压 CMD 电门时不能接通，电门灯不亮，飞行方式信号牌上不显示CMD 状态。CMD A/B can’t be engaged when CMD A/B switch was pushed, switch lights weren’t on and CMD status did not display on the flight mode annunciator |
