航空翻译_飞行翻译_民航翻译_蓝天飞行翻译公司

当前位置: 主页 > 公司新闻 > 航空资料 >

FAA运行规范 FAA Operations Specifications

时间:2011-09-26 01:01来源:蓝天飞行翻译 作者:航空 点击:


Standard Terminal Arrivals (STARs) published in accordance with 14 CFR Part 97. Use powerplant reversing systems for rearward taxi in specific airplane operations. C065 Operate airplanes with special airport authorizations, provisions, and limitations. C067 Conduct noise abatement departure profile operations with its subsonic turbojet-C068
powered airplanes over 75,000 pounds gross takeoff weight. Conduct scheduled operations at authorized airports. C070 Engage the autopilot after takeoff and initial climb at an altitude lower than specified C071
for en route operations by Title 14 CFR Section 135.93 (a).
Conduct engine-out departure procedures with approved 10-minute takeoff thrust time C072 limits. Conduct IFR airplane approach procedures using vertical navigation (VNAV) utilizing C073
a published MDA as a DA(H). Conduct airplane contact approaches using IFR Category I landing minimums. C076 Conduct certain Part 135 turbojet operations in the terminal area using visual flight C077
rules.
Conduct takeoffs in weather minimums below Category I takeoff minimums for 14 C079
CFR Part 135 airplane operations.
Conduct scheduled passenger, special terminal area IFR airplane operations in Class G C080

airspace and at airports without an operating control tower.
Conduct IFR operations using special non CFR Part 97 instrument approach or C081
departure procedures.


U.S. Department of Transportation
Federal Aviation Operations Specifications Administration
Conduct "RNP-like" foreign RNAV terminal instrument procedures with Required C358 Navigation Performance (RNP) lines of minima.
To conduct certain Category II airplane operations at specifically approved facilities. C359 Use landing performance assessment procedures that increase landing distances by at C382 least an additional 15% at time of arrival for its turbojet airplane operations.
Conduct RNP SAAAR approaches in accordance with 14 CFR Part 97 and operations C384 specification C384. Conduct continuous airworthiness maintenance programs. D072 Use a reliability program for the entire aircraft. D074 Use a reliability program for airframe, powerplant, systems, or selected items. D075

航空翻译 www.aviation.cn
本文链接地址:FAA运行规范 FAA Operations Specifications